Hot Needle Perforation Machine




Details

  • Hot needle perforation machines, which is called a "Mona Lisa" for the word perforation, because it is just not a heated needles are perforating through the materials but it has need a that level of accuracy as well as reliability to do so.
  • R.K is one of them for the Hot perforation machine, we are serving in line Hot perforation machine as well as hot Perforation unit (Roll to roll type)
  • Our In Line Hot perforation machine is developed on such a way that if it will be set up on any running web , then this would be feel you like a its made for that machine only.
  • We are providing consulting, developing and manufacturing of the Hot perforation machine for the any material.
  • Our in line set up having a following specialties.
  • We are manufacturing a separate Hot perforation machine for high production demands.
  • All of our hot perforation machine was designed and developed for some particular application and as per the material demand.

Specifications

Usage Industrial
Advantage Easy to Operate
Efficiency 66.00%
Performance Optimum
Features Long functional life
Speciality Rust resistance


Technical Data 01

Machine Name RKSH-INH
Working Width Up to 2'000 mm
Perforating Roller Core Ø 123 mm Ø over pin tips: 150- 190 mm
Counter Roller Roller Ø 150 - 200 mm Tampico fibre brush / NYLON 66 / NYLON 6 / RUBBER
Heating system
  • Externally : high-performance infrared ceramic heater with fast mid-wave frequency radiators up to 500°C (measured at perforating ring)
  • Option:
  • Internally : Cartilage heaters
Working Temperature up to 300°C (measured at perforating ring)
Drive System 3 HP, AC-motor, 50Hz, 214 V
Line Speed Mechanical speed up to 200 m/min (production speed depending on material and required hole-quality)
Penetration Adjustment Manually by Screw Thread with Dial Calliper / Electronically controlled penetration depth with regulation of hole-Ø during operation
Electronic Control Control panel of PLC Based with RKSP software with control wheel. Visual display of 7inch of Schneider made all for process parameters as well as diagnosis and error messages. Line integration is simplified as the unit has its own odometer.
Additional / Optional
Features
  •  Quick Removing Perforation as well as counter shaft.
  • Separate Heating and cooling device for efficient roller-changing preparation
  • Lifting device for perforating roller with storage hold
  • Separate mobile control unit

 


Technical Data 02

Machine Name RKSH-WWA
Working Width Up to 2'000 mm
Perforating Roller Core Ø 123 mm Ø over pin tips: 150- 190 mm
Counter Roller Roller Ø 150 - 200 mm Tampico fibre brush / NYLON 66 / NYLON 6 / RUBBER
Heating system
  • Externally : high-performance infrared ceramic heater with fast mid-wave frequency radiators up to 500°C (measured at perforating ring)
  • Option:
  • internally : cartilage heaters
Working Temperature up to 300°C (measured at perforating ring)
Drive System 3 HP, AC-motor, 50Hz, 214 V
Line Speed Mechanical speed up to 200 m/min (production speed depending on material and required hole-quality)
Penetration Adjustment

Web Attributes
Manually by Screw Thread with Dial Calliper / Electronically controlled penetration depth with regulation of hole-Ø during operation

Tension Controller with Powder/ pneumatic brake , D C Motor, Web Aligner, Proxy sensor, programmed Initial heat up, Automatic On Off perforation , Banana roller,

Electronic Control

Control panel of PLC Based with programmed RKSP software with control wheel. Visual display of 7inch of Schneider made all for process parameters as well as diagnosis and error messages. Line integration is simplified as the unit has its own odometer.

Additional / Optional
Features
  •  Quick Removing Perforation as well as counter shaft.
  • Separate Heating and cooling device for efficient roller-changing preparation
  • Lifting device for perforating roller with storage hold
  • Separate mobile control unit
  • Stroboscope for visual inspection and accuracy
  • I.R Thermometer with output display